ADSL, ADSL 2/2+ Router

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant

G992.3(ADSL2) and G992.5(ADSL2+), RE-ADSL, Annex M compliant

Rate Adaptive modem at 32 Kbps steps

Dynamic Adaptive Equalisation to improve Carrier's service area

Bridge Tap Mitigation support

ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)

AAL ATM Attributes - AAL5

Multiple PVC - up to 8 supported

Spectral compatibility with POTS

F5 OAM Loop back/Send and Receive

TR-067 compliant

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support

RFC2364 PPPoA Client support

RFC2516 PPPoE Client support

Transparent Bridge Support

PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP routing support

IP/TCP/UDP/ICMP/ARP/RARP Application Support

Network Address Translation (NAT)

Port Mapping/Forwarding

Easy setup of Port Forwarding rules for popular Games/Application

NAT Application Level Gateway for popular applications

DHCP Server/Relay/Client

DNS Relay Agent

DMZ support

Single Session IP Sec and PPTP/L2TP VPN pass through support

PPP Always on with configurable timeout

PPP Dial on Demand

SNTP

UPnP

IGMP Proxy

Management Support

Web Based HTTP management GUI

Web Based Firmware Upgrade (Local)

Soft Factory Reset Button via Web GUI

Diagnostics (DSL, OAM, Network, Ping Test)

Telnet/CLI (Read Only)

Syslog Support

Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support

Packet Filtering Firewall Support

Stateful Packet Inspection Support

Protection against Denial of Service attacks

Password Authentication to Modem

Hardware

Texas Instrument TNETD7100 Single Chip Network Processor/AFE/Line Driver Chipset

2 MB Flash ROM

8 MB SDRAM

Dying Gasp Support

ITU K.21 Support

DSL Forum TR-068 compliant

Platform Support

OS Independent

Power Requirements

Input Voltage : 9V DC +/- 10%

Input Current : 0.5A

Physical Specifications

LED Indicators:

- 1 x Power LED

- 1 x Ethernet Link/Activity Status LED

- 1 x DSL Link Status LED

External Connectors:

- 1 x RJ-11 Telephone socket for ADSL line

- 1 x RJ45 for 10/100Base-T Ethernet (MDI/MDI-X)

- 1 x DC Jack for Power Input

- 1 x Factory Default Reset Button

Measurements:

- Dimension : 105 (L) x 105 (W) x 30 (H) mm

Regulatory Approvals

C-Tick/A-Tick/Telstra IP 1149

Environmental

- Temperature Operating: 0° to 40°C

Non-Operating -25° to 70°C

- Humidity Operating: 30% to 80% Relative Humity (Non-Condensing)

Non-Operating: 30% to 95% Relative Humity (Non-Condensing)

Warranty

12 months limited Warranty