4-Port ADSL, ADSL 2/2+ Router

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant

ADSL2, ADSL2+, RE-ADSL Ready

Rate Adaptive modem at 32 Kbps steps

Dynamic Adaptive Equalisation to improve Carrier's service area

Bridge Tap Mitigation support

ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)

AAL ATM Attributes - AAL5

Multiple PVC up to 8 support

Spectral compatibility with POTS

F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support

RFC2364 PPPoA Client support

RFC2516 PPPoE Client support

RFC2225/RFC1577 Classical IP Support

Transparent Bridge Support

PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support

IP/TCP/UDP/ICMP/ARP/RARP Application Support

Network Address Translation (NAT)

Port Mapping/Forwarding

Easy setup of Port Forwarding rules for popular Games/Application

NAT Application Level Gateway for popular applications

DHCP Server/Relay/client

DNS Relay Agent

DMZ support

Single Session IP Sec and PPTP/L2TP VPN pass through support

PPP Always on with configurable timeout

PPP Dial on Demand

Management Support

Web Based HTTP management GUI

TFTP/FTP Support for Firmware Upgrade

Web Based Firmware Upgrade (Local)

Soft Factory Reset Button via Web GUI

Telnet/CLI (Read Only)

Syslog Support

Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support

Packet Filtering Firewall Support

Stateful Packet Inspection Support

Protection against Denial of Service attacks

Password Authentication to Modem

2.1 HARDWARE

Texas Instrument TNETD7300 Single Chip Network Processor/AFE/Line Driver Chipset

Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch  (Support Auto MDI/MDIx)

2 MB Flash ROM

8 MB SDRAM

Dying Gasp Support

ITU K.21 Support

2.2 PLATFORM SUPPORT

OS Independent for Ethernet

2.3 POWER REQUIREMENTS

Input Voltage : 9V DC +/- 10%

Input Current : 1.0A

3.0 PHYSICAL SPECIFICATIONS

LED Indicators

1 x Internet (Green) LED

1 x Power (Green and Red) LED

1 x DSL (Green, Red and Amber) Link Status LED

4 x Ethernet Link/Activity Status (Green) LED

External Connectors

1 x RJ-11 Telephone socket for ADSL line

4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)

1 x DC Jack for Power Input

1 x Factory Default Reset Button

1 x On/Off Power Switch

Measurements

Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm

Weight : Approx. 350 g

Approvals

C-tick:

 * AS/NZS 60950 (safety)

 * AS/NZS CISPR22:2002 (emc)

A-tick

Telstra IP 1149

Warranty

One year limited warranty