4-Port Wireless ADSL, ADSL 2/2+ Router

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant

ADSL2, ADSL2+, RE-ADSL compliant

Rate Adaptive modem at 32 Kbps steps

Dynamic Adaptive Equalisation to improve Carrier's service area

Bridge Tap Mitigation support

ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)

AAL ATM Attributes - AAL5

Multiple PVC up to 8 support (Bridge Support)

F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support

RFC2364 PPPoA Client support

RFC2516 PPPoE Client support

RFC2225/RFC1577 Classical IP Support

Transparent Bridge Support

PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support

IP/TCP/UDP/ICMP/ARP/RARP Application Support

Network Address Translation (NAT)

Port Mapping/Forwarding

Easy setup of Port Forwarding rules for popular Games/Application

NAT Application Level Gateway for popular applications

DHCP Server/Relay/client

DNS Relay Agent

DMZ support

Single Session IP Sec and PPTP/L2TP VPN pass through support

PPP Always on with configurable timeout

PPP Dial on Demand

WLAN Support

IEEE 802.11, 802.11b and 802.11g compliant

Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard

Supports 802.11b and 802.11g simultaneously

Support seamless WLAN roaming

Frequency Band :

- 2412 MHz - 2462 MHz (North America/FCC)

- 2412 MHz - 2472 MHz (ETSI/Europe)

- 2412 MHz - 2484 MHz (Japan)

- 2457 MHz - 2472 MHz (France)

- 2457 MHz - 2462 MHz (Spain)

Support Direct Sequence Spread Spectrum (DSSS) technology

Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK

Wireless Media Access Protocol- CSMA/CA with ACK

Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s

Operating Range of >300 Meters (Open Air)

Management Support

Web Based HTTP management GUI

TFTP/FTP Support for Firmware Upgrade

Web Based Firmware Upgrade (Local)

Soft Factory Reset Button via Web GUI

Diagnostic Test (DSL, OAM, Network, Ping Test)

Telnet/CLI (Read Only)

Syslog Support

Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support

Packet Filtering Firewall Support

Stateful Packet Inspection Support

Protection against Denial of Service attacks

Password Authentication to Modem

2.1 HARDWARE

Texas Instrument AR7

Marvell 88E6060-RCJ 5+1 Port 10/100 MAC/PHY Switch (Support Auto MDI/MDIx)

Texas Instrument TNETW1130 based IEEE802.11b/g MiniPCI Daughter Board

4 MB Flash ROM

16 MB SDRAM

Dying Gasp Support

ITU K.21 Support

2.2 PLATFORM SUPPORT

For Ethernet and Wireless LAN

OS Independent for Ethernet

2.3 POWER REQUIREMENTS

Input Voltage : 9V DC +/- 10%

Input Current : 1.0A

3.0 PHYSICAL SPECIFICATIONS

LED Indicators

- 1 x Internet Status LED (Green LED)

- 1 x Power LED (Green and Red LED)

- 1 x DSL Status LED (Green, Red and Amber) LED

- 4 x Ethernet Link Status LED (Green LED)

- 1 x Wireless LAN Link/Activity Status (Green) LED

External Connectors

- 1 x RJ-11 Telephone socket for ADSL line

- 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)

- 1 x DC Jack for Power Input

- 1 x Factory Default Reset Button

- 1 x On/Off Power Switch

- 1 x Co-axial Connector for Detachable 180° Rotate-able 2.4Ghz 3 dBi Antenna

Measurements

- Dimension : 176.5 (L) x 118.9 (W) x 37.9 (H) mm

- Weight : Approx. 350 g

Approvals

C-tick:

 * AS/NZS 60950 (safety)

 * AS/NZS CISPR22:2002 (emc)

A-tick

Telstra IP 1149

Warranty

One year limited warranty