4-Port Wireless ADSL, ADSL 2/2+ Router

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant

G992.3(ADSL2) and G992.5(ADSL2+), RE-ADSL, Annex M compliant

Rate Adaptive modem at 32 Kbps steps

Dynamic Adaptive Equalisation to improve Carrier's service area

Bridge Tap Mitigation support

ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)

AAL ATM Attributes - AAL5

Multiple PVC up to 16 support

Spectral compatibility with POTS

F5 OAM Loopback/Send and Receive

TR-067 compliant

PVC to VLAN mapping

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support

RFC2364 PPPoA Client support

RFC2516 PPPoE Client support

RFC2225/RFC1577 Classical IP Support

Transparent Bridge Support

PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support

IP/TCP/UDP/ICMP/ARP/RARP Application Support

Network Address Translation (NAT)

Port Mapping/Forwarding

Easy setup of Port Forwarding rules for popular Games/Application

NAT Application Level Gateway for popular applications

DHCP Server/Relay/client

DNS Relay Agent

DMZ support

Single Session IP Sec and PPTP/L2TP VPN pass through support

PPP Always on with configurable timeout

PPP Dial on Demand

Universal Plug and Play support

WLAN Support

IEEE 802.11, 802.11b and 802.11g compliant

Transmit output power up to 20dBm (standard)

Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard

Supports 802.11b and 802.11g simultaneously

Support seamless WLAN roaming

Frequency Band 2412 MHz - 2472 MHz (ETSI/Europe/Australia)

Support Direct Sequence Spread Spectrum (DSSS) technology

Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK

64/12/256 Bit WEP encryption

WPA /WPA2 Support

Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s

Operating Range of >300 Meters (Open Air)

Management Support

Web Based HTTP management GUI

Web Based Firmware Upgrade (Local)

Soft Factory Reset Button via Web GUI

Diagnostic Test (DSL, OAM, Network, Ping Test)

Telnet/CLI (Read Only)

Syslog Support

Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support

Packet Filtering Firewall Support

Stateful Packet Inspection Support

Protection against Denial of Service attacks

Password Authentication to Modem

Hardware

Texas Instrument TNETD7200 Single Chip Network Processor/AFE/Line Driver Chipset

Texas Instrument TNETW1350A based IEEE802.11b/g Daughter Board

4 MB Flash ROM

16 MB SDRAM

Dying Gasp Support

ITU K.21 Support

Platform Support

OS Independent for Ethernet

Power Requirements

Input Voltage : 9V DC +/- 10%

Input Current : 1.0A

Physical Specifications

LED Indicators

- 1 x Power LED

- 4 x Ethernet Link Status LED

- 1 x Wireless LAN Link/Activity Status LED

- 1 x DSL Status LED

- 1 x Internet Status LED

External Connectors

- 1 x RJ-11 Telephone socket for ADSL line

- 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)

- 1 x DC Jack for Power Input

- 1 x Factory Default Reset Button

- 1 x On/Off Power Switch

- 1 x 180° Rotate-able 2.4Ghz 3 dBi Antenna

Measurements

- Dimension : 156 (L) x 120 (W) x 34 (H) mm

Approvals

C-tick/A-tick/Telstra IP 1149

Environmental

Temperature Operating: 0° to 40°C

Humidity Operating: 30% to 80% Relative Humity (Non-Condensing): Non-Operating: 30% to 95% Relative Humity (Non-Condensing)

Warranty

12 months limited warranty